







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose Delta Construction
Elmstead Remodeling Summerlin provides independent Delta construction, repair, and installation service across Summerlin, NV, working on the brand’s shower valves, tub-and-shower systems, widespread bath faucets, and kitchen faucets. What makes our Delta work different is parts-level familiarity: we know which cartridge generations fail in Southern Nevada water, which aftermarket replacement causes a repeat leak, and when a valve body has reached the end of its service life. We are an independent Delta service provider and are not affiliated with, sponsored by, or authorized by Delta.

Summerlin’s housing stock runs from early-1990s villages like The Trails and Sun City Summerlin through 2000s villages like The Paseos to active construction on the western foothills, and Delta fixtures show up in all of it. A 1990s Monitor rough-in and a 2019 In2ition combo in Summerlin West fail in different ways and deserve different answers. Call (844) 797-4877 for a free estimate.
Why Trust Elmstead Remodeling Summerlin for Your Delta Construction?

Our technicians have up to 21 years of experience, and a good share of that experience is with Delta’s proprietary cartridge and valve platforms. Delta doesn’t cross over to other manufacturers’ parts. A Monitor 13/14 Series pressure-balance cartridge is its own part with its own removal tool, and an independent pro who has pulled hundreds of them knows when the cartridge comes free and when the rough-in is telling you something else.
We specify OEM Delta cartridges, seats, springs, and diverter spouts whenever the valve body is sound. Aftermarket cartridges are the single most common cause of a repeat leak; the price looks better up front and the call-back comes in six months. Every project we take on is governed by the Cedarwell Care Promise: shoe covers and drop cloths inside the house, a written price before any work starts, a photo of the clean-up before the crew leaves, quiet tools during family rest hours where possible, and pet-safe product choices where available. The 365-Day Done Right Promise covers every completed project. If it’s not done right, we make it right.
Our cabinet, surface, and fixture partners include KraftMaid, Wellborn, Cambria, Silestone, Kohler, Moen, Grohe, Schluter, and James Hardie, so a Delta repair or remodel can be coordinated with the rest of the bathroom or kitchen in one written scope. Phones are answered by a live person 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Summerlin
- Monitor 13/14 Series cartridge scale binding (RP19804 and similar). Summerlin sits around 3,000 feet and draws water with enough mineral content that scale packs into the pressure-balance cartridge bore. The handle gets stiff first, then the temperature starts drifting toward hot. Homeowners often assume the whole valve is failing. Usually it’s the cartridge, and the fix is an OEM replacement with the correct removal tool, not a handle swap.
- Diverter spout and tub spout set-screw corrosion. This one shows up in older villages like The Trails, where original spouts have been in place for decades. The set screw seizes or corrodes, and the spout starts to spin in place or leak at the wall penetration. A spout that leaks at the wall sends water behind the tub surround, so it’s worth addressing early rather than at tile-replacement time.
- Seat-and-spring wear in older two-handle bath faucets. Classic two-handle Delta foundations and Classics drip at the spout when the seats and springs wear. It’s a small part with a large effect. Replacing seats and springs is a real repair if the valve body is sound; if the body is pitted, it’s a replacement.
- In2ition wand hose connector cracking. The hose connector at the hand-shower joint cracks, or the magnetic dock loses hold and the wand drops. This causes leaks at the joint rather than at the showerhead. On newer Summerlin West homes this is often the first Delta issue anyone sees, and it’s worth fixing before the leak travels behind the wall trim.
- Original 1990s Monitor rough-in bodies corroding. When a 1990s-era rough-in has a corroded or cracked valve body, another cartridge swap is money spent on a temporary fix. That’s the point at which we start talking about a tub-to-shower conversion with a new valve inside it, rather than a third cartridge.
Delta Parts & Our Repair-vs-Replace Approach

OEM Delta parts are what we specify whenever they’re the right answer. Valve bodies, cartridges, seats, springs, diverter spouts, and wand hose connectors are all sourced per job, from the manufacturer’s parts channel or an authorized supply house, and we don’t hold local stock. That means the part matches what Delta engineered for that valve generation, and the replacement performs the way the original did when the fixture was new.
Repair vs. replace is where an owner deserves an honest answer. If the valve body is sound, the cartridge is the problem, and an OEM cartridge is the right call. If the valve body is cracked, if the rough-in is a 1990s Monitor that’s been through two cartridge cycles already, or if the fixture is being pulled out anyway during a bathroom remodel, the honest advice is to replace the valve rather than keep rebuilding it. Replace, don’t rebuild, past a certain point. Call (844) 797-4877 for a free estimate and a written price before any work starts.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We identify the exact Delta series first, because a Monitor 13/14 valve does not take a Classic kitchen faucet cartridge and a Lahara widespread does not take an In2ition joint. The written price comes before any work starts.
- 2
Repair or install. The water is shut off at the stops or the main before the cartridge comes out. The valve body is flushed so scale doesn’t get into a brand-new cartridge. An OEM Delta cartridge, seats, and springs go in, along with a new diverter spout if the old one’s set screw is corroded. For a tub-to-shower conversion, the new valve is installed before the tile goes in, not after.
- 3
Test. Water back on, pressure checked, temperature balance verified through the full hot-cold range, and the tub or shower run for several minutes to confirm no leak at the spout, the valve, or the trim plate. The clean-up photo is taken before the crew leaves.
- 4
Warranty. The 365-Day Done Right Promise covers the completed work. Manufacturer coverage on OEM Delta parts travels with the parts themselves, and we help you keep the documentation straight.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Summerlin
We work on Delta Monitor 13 and 14 Series tub-and-shower valves; Classic and Foundations single-handle kitchen faucets; Lahara and Windemere widespread bath faucets; and In2ition hand-shower and showerhead combos. For Summerlin remodels we install new Delta valves inside tub-to-shower conversions and walk-in shower builds, and we handle Delta fixture changes as part of a full bathroom remodel.

If you’re not sure which Delta series is behind your wall, don’t guess. Call (844) 797-4877 and we’ll identify it before we quote.
We Also Service These Brands
Elmstead Remodeling Summerlin is a multi-brand remodeler, not a single-brand shop. Alongside Delta we work with KraftMaid and Wellborn cabinets, Kohler and Toto fixtures, and Cambria countertops, so a bathroom or kitchen project can be scoped as one written price with one crew. If your Summerlin home has been updated in stages and carries several brands, that’s fine. We’ll identify each one and service it on its own terms.
FAQs – Delta Construction Service in Summerlin

The pressure-balance cartridge is usually at fault, most often an RP19804 or similar cartridge with mineral scale packed into the bore. Summerlin’s hard water causes it. An OEM replacement cartridge and a valve-body flush solve the problem in most cases; an aftermarket cartridge is the usual reason it comes back. Call (844) 797-4877 for a free estimate.
It can be repaired as long as the valve body is sound; if the body is cracked or corroding, replacement is the honest answer. That’s exactly the scenario we see in early-1990s villages like The Trails and Sun City Summerlin, where a third cartridge swap usually means the rough-in is done. If you’re remodeling anyway, a tub-to-shower conversion with a new valve is the cleaner path. Price ranges below, and estimates are free at (844) 797-4877.
No; a leak at the wand hose connector or a magnetic dock that won’t hold usually means replacing the hose connector or the wand, not the whole showerhead. The showerhead body is usually fine. Call (844) 797-4877 and we’ll confirm which part your specific In2ition needs before quoting.
Often yes, if the valve body is sound. A Classic or Foundations single-handle faucet with new seats and an OEM cartridge is a durable fixture, and keeping it saves money you can put into cabinets or countertops. If you’re replacing it, a new Delta or Kohler goes in within the same written scope. Call (844) 797-4877 for a free estimate.
Check the valve body for corrosion, confirm whether the existing Delta valve is a Monitor 13/14 or an older series, and ask your contractor to pull the HOA and design-review approval before demo starts. Summerlin is a master-planned community where village-level design review and CC&Rs can govern finish choices and exterior appearance, and an approval that comes late stalls the job. Estimates are free at (844) 797-4877.
Delta tub-to-shower conversion $3,500 – $10,000; walk-in shower installation $4,500 – $12,000; full bathroom remodel $9,000 – $28,000; bathroom vanity installation $800 – $3,000; shower replacement $3,000 – $8,500. Call (844) 797-4877 for a written price before any work starts.
| Service | Summerlin Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Shower Replacement | $3,000 – $8,500 |
Book Your Delta Service in Summerlin, NV
Call (844) 797-4877 to schedule your free estimate. We’ll identify the Delta series, explain what’s repair and what’s replacement, and give you a written price before any work starts. Shoe covers and drop cloths inside the house, quiet tools during family rest hours, a clean-up photo before we leave, and the 365-Day Done Right Promise on the completed work.
Written by the team at Elmstead Remodeling Summerlin.












